Panasonic H-37PWD7UY Operating Instructions Manual page 15

Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13).
Press this button to turn the Plasma Display On, from Stanby mode. Press it again to turn the Plasma Display
Off to Stanby mode.
SURROUND button
The surround setting switches on and off each time the SURROUND button
is pressed.
The benefits of surround sound are enormous. You can be completely
enveloped in sound; just as if you were at a concert hall or cinema.
Note:
The surround settings are memorized separately for each AUDIO MENU
(STANDARD, AUTO).
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
MULTI ZOOM
SWAP SELECT MOVE
PIP
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY
INPUT button
(INPUT1, INPUT2, INPUT3 and PC IN selection)
Press to select INPUT1, INPUT2, INPUT3 and PC IN input SLOTS
sequentially. (see page 18)
Sound mute On / Off (see page 24)
Volume Adjustment
Press the Volume Up "+" or Down "–" button to increase or decrease
the sound volume level.
R button (see page 16, 17)
Press the R button to return to previous menu screen.
ACTION button
Press to make selections.
POSITION buttons
SOUND button (see page 24)
SET UP button (see page 16)
PICTURE POS. / SIZE button
(see page 20)
ASPECT button
Press to adjust the aspect.
(see page 19)
OFF TIMER button
The Plasma Display can be preset to switch to stand-by after a fixed
period. The setting changes to 30 minutes, 60 minutes, 90 minutes and
0 minutes (off timer cancelled) each time the button is pressed.
30
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
Basic Controls
ON
Digital Zoom (see page 25)
ZOOM
Press to access
MOVE
Digital Zoom.
This displays an enlargement of
the designated part of the
displayed image.
60 90
0
OFF
SURROUND ON
15