Color System / Panasonic Auto; 3:2 Pulldown / Video Nr - Panasonic H-37PWD7UY Operating Instructions Manual

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input
signal mode.("SIGNAL [VIDEO]" menu is displayed.)
Mode
COLOR SYSTEM
Panasonic
AUTO (4:3)

3:2 PULLDOWN / VIDEO NR

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal.
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during "COMPONENT" input signal.
VIDEO NR: Automatically reduces unwanted picture noise.
Note:
VIDEO NR cannot be adjusted while a PC signal is being applied.
1
2
R
Press to select the "COLOR SYSTEM" or
"Panasonic AUTO".
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set the color system to match the input signal. If set to "AUTO", the color system is
determined automatically.
AUTO PAL
Set to "NORMAL" to view 4:3 images in an unchanged format when Panasonic AUTO
is selected. If you would like to view 4:3 images in Just format, set to "JUST".
Press to select 3:2 PULLDOWN
or VIDEO NR.
Press to set ON/OFF.
Press to exit from adjust mode.
SET UP for Input Signals
Function
SECAM M.NTSC
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC) ON
COLOR SYSTEM AUTO
3 : 2 PULLDOWN OFF
Panasonic AUTO (4 : 3) NORMAL
VIDEO NR OFF
[ COMPONENT ]
SIGNAL
3 : 2 PULLDOWN OFF
VIDEO NR OFF
SET UP
SIGNAL
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE
OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC) ON
AUTO
COLOR SYSTEM
3 : 2 PULLDOWN OFF
NORMAL
Panasonic AUTO (4 : 3)
VIDEO NR OFF
NTSC
SET UP
SIGNAL
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
SIGNAL
SYNC
AUTO
3 : 2 PULLDOWN OFF
VIDEO NR OFF
H-FREQ. 33.8 kHz
V-FREQ. 60.0 Hz
SIGNAL
3 : 2 PULLDOWN OFF
VIDEO NR OFF
H-FREQ. 33.8 kHz
V-FREQ. 60.0 Hz
1/2
1/2
[ RGB ]
[ DVI ]
35