Accessories; Accessories Supplied; Remote Control Batteries - Panasonic H-37PWD7UY Operating Instructions Manual

Accessories

Accessories Supplied

Check that you have the Accessories and items shown
Operating
Instruction book
Ferrite core
(Small size) × 1

Remote Control Batteries

Requires two AA batteries.
1. Turn the transmitter face down.
Press and slide off the battery
cover.
Helpful Hint:
For frequent remote control users, replace old batteries with
Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
8
Remote Control
Transmitter
EUR646529
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
MULTI ZOOM
PIP SWAP SELECT MOVE
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY
Ferrite core
(Large size) × 2
2. Install the batteries as shown in the
battery compartment.
(Polarity + or – must match the
markings in the compartment.)
Batteries for the Remote
Control Transmitter
(AA Battery × 2)
Fixing bands
3. Replace the cover and slide in
reverse until the lock snaps.
Two "AA" size
Warranty
AC cord