Using The Phone Charger - Sanyo SCP-6650 User Manual

Hide thumbs Also See for SCP-6650:
Table of Contents

Advertisement

Always use an approved travel charger or vehicle power adapter
to charge your battery.
Warning!
Using the wrong battery charger could cause damage to your
phone and void the warranty.

Using the Phone Charger

1. Plug the charger into a wall outlet.
2. Open the cover of the charger jack located on the right side of
your phone.
3. Plug the other end of the charger (with the white triangle
marks facing up) into the charger jack.
Charging when your phone is turned on:
The battery icon appears as follows while charging.
The battery icon turns to
Charging when your phone is turned off:
The battery icon
"BATTERY CHARGING--Power Off--" is shown on the
display while charging. When the battery is completely
discharged, it may take several minutes until the message
is shown on the display. The battery icon turns to
and the message changes to "CHARGING COMPLETE--
Power Off--" when charging is completed.
Tip:
Be sure to watch your phone's battery strength indicator and charge
the battery before it runs out of power.
Note:
You can also charge your phone's battery with a USB cable (not
included). Simply plug one end of the USB cable into your phone and the
other end into a free USB port on your desktop or laptop computer. (If
your battery has been completely run down, it cannot be charged via the
USB cable.)
appears, and the message
when charging is completed.
2. The Basics
,
13

Advertisement

Table of Contents
loading

Table of Contents