Protocol Template - TP-Link T1700X-16TS User Manual

Protocol Group Config

Protocol Name:
VLAN ID:
Protocol Group Member

UNIT:1/LAGS

6.5.3 Protocol Template

The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
Figure 6-10 Enable Protocol VLAN for Port
Select the defined protocol template.
Enter the ID number of the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
72