Preprint Setup; Preprinting Of All Images - Olympus C-2500L Instructions Manual

Preprint Setup

You can store information such as the number of copies to print out on either SmartMedia or a CompactFlash. This procedure is
called "preprint setup".
Preprint setup is only effective for prints made at stores that can print out using DPOF-ready printers and DPOF systems.
1
4
Preprint mark The number
[SM]

Preprinting of All Images

Downloaded From camera-usermanual.com
E-58
2
~2 SHQ
2
1
2
Setting the Number of Copies to Print Out
This procedure stores the number of copies to print out via a printer, etc.
The actual printing is done by simply loading the card media into a print-
er. The images will be printed out in the specified number of copies.
1
Set the mode dial to
2
Select images to set preprint with the jog dial.
3
Press the [ / ] button.
The window where you specify the number of copies will appear on
the LCD monitor.
4
Specify the number of copies with the right / left point of the jog
dial.
5
Press the [OK] button.
The green mark will appear when the number is one, and the red
mark and the specified number when the number is more than one,
in the upper right-hand corner of the image as it is displayed on the
LCD monitor.
MEMO
• To cancel preprint setup, select "0" after displaying images to cancel,
or select "CLEAR ALL" from the menu.
Preprinting of All Images
The below procedure explains how to set up all images on the media
selected at preprinting.
1
Set the mode dial to
2
Press the [ ] button.
The first menu will appear on the LCD monitor.
3
Align the cursor with
dial.
4
Select [SELECT ALL] with the right point of the jog dial.
5
Press the [OK] button.
MEMO
• To cancel the preprint of all images, select "CLEAR ALL" under
and press the [OK] button.
.
.
with the top / bottom point of the jog