Broadcast Report - Panasonic KX-FP270 Operating Instructions Manual

Using the BROADCAST key
The documents will be scanned and stored into memory when using the BROADCAST key. After transmission,
the stored documents will be erased automatically.
The memory capacity is approx. 25 pages based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 128.
1
Insert the document FACE DOWN.
2
Press BROADCAST
The documents will be fed into the unit and
scanned into memory. Then the unit will transmit
the data to each station, calling each number
sequentially.
Note:
If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 5 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press STOP while the unit displays
"BROADCASTING".
Display:
2. Press START/COPY/SET

Broadcast report

After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a broadcast report:
BROADCAST REPORT
NO. OTHER FACSIMILE
001 Mike
002 Peter
003 Sam
004 Kim
.
SEND CANCELED?
YES: PRESS SET
.
START TIME USAGE TIME
Jan. 10 03:31PM 01'10
Jan. 10 03:33PM 01'08
Jan. 10 03:34PM 01'09
Jan. 10 03:35PM 01'10
TOTAL 004'37
Total number of
pages sent to
the fax server.
Sending Faxes
STOP
START/COPY/SET BROADCAST
Jan. 10 1998 03:36PM
PAGES (IQ-FAX) RESULT
OK
02
OK
02
OK
02
OK
02
008 (008)
The " " mark in this column
shows the fax has been sent
to the fax server.
(1/1)
67