Broadcast Report - Panasonic KX-FM106 Operating Instructions Manual

Sending Faxes
Using the BROADCAST keys
The document will be scanned and stored into memory when using the BROADCAST keys. After transmission,
the stored document will be erased automatically.
The memory capacity is approx. 25 pages based on the CCITT No. 1 Test Chart in standard resolution.
For the CCITT No. 1 Test Chart, see page 125.
Insert the document FACE DOWN.
1
Press the desired (BROADCAST) key.
2
≥The document will be fed into the unit and
scanned into memory. The unit will then transmit
the data to each station, calling each number
sequentially.
Note:
≥If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
≥If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 5 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press (STOP) while the unit displays
"BROADCASTING".
Display:
SEND CANCELED?
YES: PRESS SET
2. Press (START/SET/COPY).

Broadcast report

After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a broadcast report:
BROADCAST REPORT 1
NO.
OTHER FACSIMILE
01 Mike
02 Peter
03 Sam
04 Kim
Total number of pages sent to
the fax server.
60
START TIME USAGE TIME
Jan. 10 03:31PM 01'10
Jan. 10 03:33PM 01'08
Jan. 10 03:34PM 01'09
Jan. 10 03:35PM 01'10
TOTAL 004'37
STOP
START/SET/COPY
Jan. 10 1999 03:36PM
PAGES (IQ-FAX) RESULT
OK
02
OK
02
OK
02
OK
02
(008)
008
The " " mark in this column shows the fax
has been sent to the fax server.
BROADCAST