Panasonic KX-FP270 Operating Instructions Manual page 119

6
Insert the blue gear into the blue core of the new
film.
7
Insert the three green gears into the remaining
cores of the new film.
8
Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
The shiny side should be facing up.
9 Lock the four gears of the film by (
back the top side gears and (
bottom side gears forward until they lock into place.
If the film is slack, tighten it by winding the
bottom side gears.
Incorrect
10
Insert the film cartridge by matching the blue label
on the cartridge with the one on the unit.
11
Close the cover securely by pushing down on both
ends.
The unit will check if the film is installed correctly.
The following message will be displayed.
Display:
If the following message is displayed, the film is
not inserted correctly.
Reinsert it correctly.
) pushing
A
) pulling the
B
Correct
Tight
PLEASE WAIT
CHECK FILM
For assistance, call 1-800-435-7329.
Blue core
Guide tabs
Guide tabs
Slots
Blue gear
Cartridge
Top side
Bottom
gears
side gear
Bottom
side gears
Ink Film
Blue gear
Slots
Green gears
Blue label
Film
Top
side gear
B A
Blue labels
Film
cartridge
119