Onkyo HT-RC630 Service Manual page 13

DEBUG MODE-12
SERVICE INFORMATION MODE
Displaying Service information
This service information display system is helpful in analyze the status when the unit goes into Protect mode and is powered off.
Pay attention that the status will change if a button is pushed.
1. Press twice the ON/ STANDBY key while pressing the DISPLAY key.
e.g.
M 1 .0 3 /1 4 3 0 7 AL N
2. Press HOME button within 3 seconds above.
e.g.
- 8 0 F
Power off Cause Temperature
T : Thermal Protect : xx F
V : Voltage Protect
I : Current Protect
- : Other
Listening Mode Code List
01 C_LM_LAST
02 C_LM_PURE
03 C_LM_DIRECT
04 C_LM_STEREO
05 C_LM_MONO
20 C_LM_SURR
50 C_LM_THX_MUSIC
70 C_LM_THX_GAME
90 C_LM_THX_CINEMA
A0 C_LM_THX_U2GAME
A8 C_LM_THX_U2MUSIC
B0 C_LM_THX_U2CINEMA
3. Press HOME button again. The following information are displayed.
e.g.
0 1 :2 3
Time after Power on
xx : xx
4. Press ON/STANDBY button to exit the display of service information.
(Ref.: Press RETURN button to initialize the data in the service information.)
Pr o te c tD a ta CL R
No r m a l d is p la y
The version of main microprocessor is
displayed only for 3 seconds.
2 7 D D
Information Displayed (Record this Information)
Volume Level Listenning Mode
or xx C ---> Refer to the code list below.
D0 C_LM_AUDYSSEY
48 C_LM_DTSSS
06 C_LM_ORCHESTRA
07 C_LM_UNPLUGGED
08 C_LM_STUDIOMIX
09 C_LM_TVLOGIC
0A C_LM_ALLCHST
0B C_LM_FULLMONO
0C C_LM_TD
F1 C_LM_TESTTONE
F2 C_LM_TESTTHR
F3 C_LM_TESTAUTO
1 0 h Information Displayed (Record this Information)
Time after Initialize
xx hour
TX-SR333/ HT-R393/ HT-RC630
F4 C_LM_ASC
F5 C_LM_FLASH
F6 C_LM_DEBUGMODE
F7 C_LM_FLASH2
F8 C_LM_FLASH3
F9 C_LM_FLASH4
FA C_LM_FLASH_CHECK
0D C_LM_RPG
0E C_LM_ACTION
0F C_LM_ROCKBAND
10 C_LM_SPORTS