Usb Connector Board - HP ProBook 4325s Maintenance And Service Manual

USB connector board

Description
USB board with cable
Before removing the USB connector assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. Hard drive (see
g. Display assembly (see
h. Top cover (see
i. System board (see
Remove the USB connector assembly:
1. Position the computer right-side up with the right side toward you.
2. Release the USB connector board cable from the base enclosure clips and routing channel (1).
Battery on page 45).
Switch cover on page
Keyboard on page 49)
Optical drive on page
Speakers on page 56)
Palm rest on page 58)
Hard drive on page 61)
Display assembly on page
Top cover on page 85)
System board on page
Spare part number
599524-001
47)
53)
77)
89)
Component replacement procedures 91