Usb/Power Connector Board - HP Compaq Presario F700 Maintenance And Service Manual

Remove the audio board (3).
3.
Reverse this procedure to install the audio board.

USB/power connector board

Description
USB/power connector board
Before removing the USB/power connector board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Switch cover (see
c.
Keyboard (see
d.
Display assembly (see
e.
Top cover (see
f.
System board (see
g.
Battery on page 37).
Hard drive on page 40)
Optical drive on page
Switch cover on page
Keyboard on page 52)
Display assembly on page
Top cover on page 63)
System board on page
48)
50)
56)
65)
Component replacement procedures
Spare part number
447444-001
69