4.
Remove the battery (see
5.
Remove the following components:
a.
Switch cover (see
b.
Keyboard (see
c.
Palm rest (see
Remove the WLAN module:
1.
Position the computer right-side up with the front toward you.
2.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The white WLAN antenna cable is connected to the WLAN module "Aux" terminal.
3.
Remove the two Phillips PM2.5×3.0 screws that secure the WLAN module to the computer. (The
edge of the module opposite the slot rises away from the computer.)
66
Chapter 4 Removal and replacement procedures
Battery on page
Switch cover on page
Keyboard on page
Palm rest on page
The black WLAN antenna cable is connected to the WLAN module "Main" terminal.
45).
47)
49)
58)