Using The Osd Menu - Dell e248wfp User Manual

B
OSD Menu / Select
C
Brightness /Contrast
Hot Key
C and D
Down (-) and Up (+)
D
Auto Adjust
E
Power button
(with power light
indicator)

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to open the OSD menu and display the main menu.
Main Menu for Auto Detect Analog (VGA) Input
Downloaded from ManualMonitor.com Manuals
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See
the OSD Menu.
Use this button for direct access to the "Brightness" and "Contrast" control menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment,
you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached
cables.
Use the power button to turn the monitor on and off.
The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.
or
Auto Adjust In Progress
Main Menu for Auto Detect Digital (DVI) Input
Using