Dell e248wfp User Manual page 18

Hue
Saturation
Advanced Settings:
Input Color Format
OSD Settings:
Horizontal Position
Vertical Position
OSD Hold Time
OSD Lock
Downloaded from ManualMonitor.com Manuals
Theatre Preset: Mode suitable for movie playback;
l
Sports Preset: Mode suitable for sports programme;
l
Nature Preset: Mode suitable for nature scenes. User can adjust the Hue (Tint)/Saturation based on the preference.
l
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to adjust
the hue from '0' to '100' .
- makes video image shade into greenish
+ makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
This feature can adjust the color saturation of the video image. Use - or + to adjust the saturation from '0' to '100' .
- makes video image looks more monochrome
+ makes video image looks more colorful
NOTE: Saturation adjustment only available for video input.
Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or a DVI cable. Choose the YPbPr+ option if monitor is
connected to a DVD by a YPbPr cable.
Adjust the settings for the OSD, including the location, the amount of time the menu remains on-screen, and the rotation of the OSD.
Position of the OSD:
To adjust the horizontal position of the OSD, use the - and + buttons, and move OSD to the left and right.
l
To adjust the vertical position of the OSD, use the - and + buttons, and move OSD down and up.
l
OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the length of time the OSD remains active after the last time
you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
OSD Lock:
Controls user access to adjustments. When Yes (+) is selected, no user adjustments are allowed. All buttons are locked except the menu
button.
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock selected.
Select No (-) to unlock and allow user access to all applicable settings.
NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds.