Routing Table Maintenance Protocol - 3Com corebuilder 3500 Implementation Manual

Routing Table
Maintenance Protocol
inShortDdps — Number of input DDP datagrams that were dropped
because the system was not their final destination and their type was
short DDP
inTooFars — Number of input datagrams that were dropped because
the system was not their final destination and their hop count would
exceed 15
inTooLongs — Number of input DDP datagrams that were dropped
because they exceeded the maximum DDP datagram size
inTooShorts — Number of input DDP datagrams that were dropped
because the received data length was less than the data length
specified in the DDP header, or the received data length was less than
the length of the expected DDP header
outLocals — Number of host-generated DDP datagrams
AppleTalk uses the Routing Table Maintenance Protocol (RTMP) to build
and maintain routing tables. Your system allows you to view a variety of
RTMP statistics, including:
inDatas — Number of good RTMP data packets that were received
inOtherErrs — Number of RTMP packets received that were rejected
for an error other than a version mismatch
inRequests — Number of good RTMP request packets that were
received
inVersionErrs — Number of RTMP packets received that were
rejected due to a version mismatch
outDatas — Number of RTMP data packets that were sent
outRequests — Number of RTMP request packets that were sent
routeDeletes — Number of times that RTMP deleted a route that
was aged out of the table
AppleTalk Statistics 471