Step 2 The Remote Control - Panasonic DVD-S1 Operating Instructions Manual

Enjoying multi-channel surround sound
n
Amplifier with a built-in
decoder or a decoder-amplifier
combination
Change "DOWN SAMPLING", "DOLBY DIGITAL" and "DTS"
(è page 14, "AUDIO" tab).

STEP 2 The remote control

Batteries
n
R6/LR6, AA
COAXIAL IN
Coaxial cable
Connect the AC power supply cord last
n
AC power supply cord (included)
To household AC outlet
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
•
Insert so the poles (4 and 3) match those in the remote control.
•
Do not use rechargeable type batteries.
Do not:
•
mix old and new batteries.
•
use different types at the same time.
•
heat or expose to flame.
•
take apart or short circuit.
•
attempt to recharge alkaline or manganese batteries.
•
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the
fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in
a cool, dark place.
Use
n
Aim at the remote control sensor (è page 8), avoiding obstacles, at a maximum range
of 7 m (23 feet) directly in front of the unit.
AC IN