Removing Clogs - Panasonic MC-UL675 Operating Instructions Manual

Secondary
Filter Screen
Tamis filtrant
Filtro secundario
Suction Inlet
Entrée d'aspiration
Entrada de aspiración
Hose Inlet
Entrée du tuyau
Entrada de
manguera

Removing Clogs

Connector Pipe
Tube connecteur
Tubo conector
Short Hose
Tuyau court
Manguera corta
A
B
B
A
Hose Coupling
Accouplement
de tuyau
Acoplamiento de
manguera
- 54 -
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢ ➢ Check the hose area.
➢ ➢ Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
➢ ➢ Visually inspect the hose and the
base area into which the hose is
connected.
➢ ➢ Remove any visible clog.
➢ ➢ Re-connect the extension hose to the
connector pipe.
➢ ➢ Plug in the vacuum cleaner and turn it
on.
➢ ➢ Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
➢ ➢ Turn off and unplug the vacuum
cleaner.
➢ ➢ Remove dust bin and check
secondary filter screen for clogs.
➢ ➢ If the dust bin, filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢ ➢ Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.