DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
CoS Output Scheduling
CoS can be customized by changing the output scheduling used for the hardware classes of service in the Switch. As with any
changes to CoS implementation, careful consideration should be given to how network traffic in lower priority classes of service
is affected. Changes in scheduling may result in unacceptable levels of packet loss or significant transmission delay. If you choose
to customize this setting, it is important to monitor network performance, especially during peak demand, as bottlenecks can
quickly develop if the CoS settings are not suitable. In the CoS folder, click CoS Output Scheduling, to view the screen shown
below.
You may assign the following values to the CoS classes to set the scheduling.
Parameter
Max. Packets
Click Apply to implement changes made.
Figure 8- 6. CoS Output Scheduling Configuration window
Description
Specifies the maximum number of packets the above specified hardware priority class of
service will be allowed to transmit before allowing the next lowest priority queue to
transmit its packets. A value between 1 and 55 can be specified.
96