Sony SAL1118 Service Manual page 14

Hide thumbs Also See for SAL1118:

Table of Contents

HELP03

Adhesive bond (LOCTITE 460) (Note)

Note:

Use adhesive bond (LOCTITE 460) or an equivalent article.

Do not use what becomes white after drying like quick-drying glue.

Grease (G-15): J-6082-619-A

Apply adhesive bond ((LOCTITE 460) to the back side of the mount index mark, and attach it to the rear lens barrel assy.

Apply grease (G-15) to the instruction portion of the rear lens barrel assy.

Pass the flexible board through the hole on the rear lens barrel assy, and fix the rear lens barrel assy with five screws as shown in the

figure.

Flexible Board

SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)

Hole

Rear Lens Barrel Assy

Screws

Apply adhesive bond

(LOCTITE 460)

(Back side)

Rear Lens Barrel Assy

Apply grease (G-15) (Side edge)

HELP

Table of Contents