Konica Minolta Bizhub 501 Service Manual page 223

5. OPERATIONS
B. Paper aligning sequence
• In normal print and staple mode, the paper is fed into the tray at its center position.
• If no stapling is involved in the Sort or Group Print mode, the aligning plate shifts 15 mm to
the front or rear from the center. This stacks papers in a saw tooth manner, each being off-
set by about 30 mm with respect to the others.
This shifting motion is not performed when papers are fed into the MT or the SD.
[5]
[4]
[1] 30mm
[2] Center
[3] Shift (Sort/Group)
24
Theory of Operation Ver.1.0 May. 2008
[3]
[4] Normal/Staple
[5] Aligning Plate
[1]
[2]
4349t2c015na