Before Use; Standard Accessories; To Prevent Damage And Faults; When Transporting - Panasonic Lumix DMC-TZ3 Operating Instructions Manual

Part numbers are as of January 2007
IIBo a test shot first!
@Check first to see if you can take
pictures and record sounds (motion
pictures/pictures with audio)
successfully.
[]We will not compensate for failed/
lost recording or for direct/indirect
damage.
@Panasonic will not provide
compensation even if damage is
caused by faults with camera or card.
mCertain pictures cannot be played
back
@Pictures edited on a computer
@Pictures taken or edited on a different
camera
IIAvoid shocks, vibration, and pressure
@Avoid exposing the camera to strong
vibration or shock; e.g. dropping or
hitting the camera, or sitting down with
the camera in your pocket.
@Do not press the lens or the LCD monitor.
[]Do not get the camera wet or insert
foreign objects
@Do not expose the camera to water,
rain, or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc)
@Avoid exposing lens and socket to dust
or sand, and do not allow liquids to leak
into gaps around buttons.
(Pictures taken or edited on this camera IIAvoid condensation caused by sudden
may also not be able to be played back
on other cameras)
IISoftware on the CB-ROM supplied
The following actions are prohibited:
@Making duplicates (copying) for sale or
rent
@Copying onto networks
[LCD monitor characteristics
Extremely high precision technology is
employed to produce the LCD monitor
screen. However there may be some dark
or bright spots (red, blue or green) on the
screen. This is not a malfunction.
The LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on pictures
on the built-in memory or a card.
changes in temperature and humidity
@When moving between places of
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
@If the lens clouds up, switch off the
power and leave for about two hours to
allow camera to adjust to conditions.
@if the LCD monitor clouds up, wipe with
a soft, dry cloth.
LCD monitor
0 VQT1B61
IIWhen transporting
@Switch off power.
We recommend using a genuine leather
case (DMW-CT3, sold separately).
@
__ens _
@Do not leave in direct
sunlight.
_NIf dirty, clean with soft,
dry cloth.
[] Battery Pack
CGA-S007A
(R14)
(referred to in this manual as 'battery')
[] Battery Charger
DE-A45B
(R14)
(referred to in this manual as 'charger')
[] Battery Carrying
Case
VYQ3680
(R91)
[] Strap
VFC4090
(P.12)
[Optional accessories (R96)
@Cards are optional. You can record
or play back pictures on the built-in []AV Cable
memory when you are not using a card.
K1HA08CD0008
[]USB Connection
Cable
K1HA08CD0007
(R74, 76)
(R79)
[]CD-ROM
(R26)
@If any accessories are lost, customers
in the USA should contact Panasonic's
parts department at 1 800 833-9626
and customers in Canada should
contact 1 800 99-LUMIX (1-800-995-
8649) for further information about
obtaining replacement parts.
The following software on the CD-ROM
is referred to in this manual as 'supplied
software'.
@LUMIX Simple Viewer
@PHOTOfunSTUDIO -viewer-
VQT1B61
11