Usage Cautions And Notes; Caring For Your Camera; Memory Cards Notes; Battery Notes - Panasonic Lumix DMC-TZ3 Operating Instructions Manual

Panasonic digital camera user manual
Table of Contents

Advertisement

Camera may become warm if used for long periods of time, but this is not a fault.
@To avoid jitter, use a tripod and place in a stable location.
(Especially when using telescopic zoom, lower shutter speeds, or self-timer)
@ Keep the camera as far away as possible
from electromagnetic
equipment
(such
as microwave
ovens,
TVs, video games etc.).
_,,Ifyou use the camera on top of or near a TV, the pictures and sound on the camera
may be disrupted by electromagnetic
wave radiation.
_,,Donot use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
÷Recorded data may be damaged, or pictures may be distorted, by strong magnetic
fields created by speakers or large motors.
÷Electromagnetic
wave radiation generated by microprocessors
may adversely affect
the camera, disturbing the pictures and sound.
_,,Ifthe camera is adversely affected by electromagnetic
equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect AC
adaptor (DMW-AC5PP;
optional). Then reinsert the battery or reconnect AC adaptor
and turn the camera on.
Do not use the camera near radio transmitters
or high-voltage
lines.
_01f y ou record near radio transmitters
or high-voltage
lines, the recorded pictures and
sound may be adversely affected.
@Do not extend the supplied cord or cable.
@ Do not allow camera to come into contact with pesticides or volatile substances
(can
cause surface damage or coating to peel).
@Only use files from other devices if compatible with Design Rule for Camera File
system (Pictures are based on DCF (Design rule for Camera File system) and Exif
(Exchangeable
Image File Format) standards, by Japan Electronics and Information
Technology
Industries Association (JEITA)).
@ Disconnect
battery/AC adaptor (DMW-AC5PP,
sold separately).
@ Do not use benzene, thinners, alcohol, kitchen detergent, or chemically treated cloth
(can cause surface damage or coating to peel).
@Wipe away dust or fingerprints
with soft, dry cloth. Clear stubborn stains or rain/sea
water stains with a thoroughly wrung cloth, before wiping with a dry cloth.
@ Remove battery and card (ensure that battery is removed to prevent damage through
over-discharge).
@Do not leave in contact with rubber or plastic bags.
@Store together with a drying agent (silica gel) if leaving in drawer, etc. Store batteries
in cool (15 °C-25 °C (59 °F-77 °F)) places with tow humidity (40 %-60 %) and no
major temperature changes.
@Charge battery once per year and use completely once before storing again.
@To prevent damage to cards and data
_Avoid high temperatures,
direct sunlight, electromagnetic
waves, and static
electricity.
_Do not bend, drop, or expose to strong impacts.
_Do not touch connectors
on reverse of card or allow them to become dirty or wet.
@When disposing of/transferring
memory cards
If using the 'format' or 'delete' functions on your camera or computer, this only
changed the file management
information,
and does not completely
delete the data
from within the memory card. When disposing of or transferring your memory cards,
we recommend physically destroying the memory card itself, or using commercially
available computer data erasing software to completely
delete the data from the
card. Data within memory cards should be managed responsibly.
@Store battery in battery carrying case after use.
@Do not use if damaged or dented (especially connectors),
e.g. by dropping (can cause faults).
@The unusable battery should be discarded
in accordance
with battery recycling laws. Call the RBRC hotline at 1-800-
822-8837 for information.
@Estimated recording capacity of 270 [300 *_] pictures (P.14)
is based on the following CIPA .2 standards.
*_ DMC-TZ2
CtPA standards:
Using
Panasonic SD memory card (16MB) 4_Temperature 23 °C (73.4 °F), humidity
50 % <,NORMAL PICTURE mode LCD
monitor ON *_STABILIZER (MODE1) _First
picture taken 30 sec after power turned on 1 picture taken per 30 sec Full
flash
used for every other picture Zoom
operation for each picture (max. W
, max. T, or
max. T
_ max. W) _Power turned off after each 10 pictures, battery allowed to cool
,2 CIPA = Camera & Imaging Products Association
@When charging
,,_Remove any dirt on connectors with dry cloth.
,,_Keep at least 1 m (3.28 feet) away from AM radio (may cause radio interference).
,,_Noises may be emitted from inside, but this is not a fault.
,_AIways remove from mains socket after charging (up to 0.1 W consumed if left in
place).
@SDHC Logo is a trademark.
@Leica is a registered trademark
of Leica Microsystems
IR GmbH.
@Elmar is a registered trademark of Leica Camera AG.
@Other names, company names, and product names printed in these instructions
are trademarks or registered trademarks
of the companies concerned.
90
VQT1B61
VQT1B61
91

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-tz2

Table of Contents