Panasonic Lumix DMC-LC50GN Operating Instructions Manual page 87

ª To print the date connecting to the
printer
There are two ways.
1 The one is to connect to the printer
and then set the date printing.
2 The other is to set the date printing
with the DPOF print in advance.
1 Setting the date printing after
connecting to the printer
• Before starting the print (when the
screen shown below appears), press
the [DISPLAY] button whether to set
the date printing or not.
• Single picture
PictBridge
PLS CHECK THE PRINTER
START PRINTING?
COUNT
YES
SET COUNT
SELECT
• DPOF picture
PictBridge
PLS CHECK THE PRINTER
START PRINTING?
YES
SELECT
• Follow the procedure above in these
cases:
• When your printer does not support
DPOF.
• When your printer does not support
the date printing on DPOF.
• When the date printing is not set on
the DPOF print.
Playback (advanced)
1
NO
DATE
DISPLAY
SET
NO
DATE
DISPLAY
SET
87
2 Setting the date printing with the
DPOF print in advance
• Set the date printing with the DPOF
print (P65) in advance. After selecting
[DPOF] and starting the prints, the
recorded date is printed. When you
start printing, you do not need to press
[DISPLAY] button.
• Follow the procedure above in these
cases:
• When your printer supports the
date printing on the DPOF print
¬ Suggestions/Tips ¬
ª About the date printing
• The setting on the printer may have
priority over the setting on the camera
in the date print. Also check the date
print setting on the printer.
• Setting the date printing by [DISPLAY]
button is available only when the
printer supports the date printing.
• When you attempt to set the date
printing by pressing the [DISPLAY]
button and by setting the DPOF print
at a time, it depends on the printer you
use which date printing has a priority.
(P65)
.