Panasonic Lumix DMC-LC50GN Operating Instructions Manual page 86

Preparation
• Set the DPOF print with this camera in advance. (P65)
• Set the paper size and print quality with the printer. (Read the printer operating
instructions.)
• Connect the camera to a printer. (P84)
ª DPOF picture
1
Select [DPOF PICTURE].
PictBridge
SINGLE
PICTURE
SELECT
WB
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
• Press the [MENU] button, and you
can change the DPOF print
setting.(P65)
2
Select [YES] and print.
PictBridge
PLS CHECK THE PRINTER
START PRINTING?
YES
SELECT
WB
Playback (advanced)
DPOF
PICTURE
SET
WB
NO
DATE
DISPLAY
SET
WB
• Press the [MENU] button to cancel
printing.
• Refer to 87 for the date printing.
¬ Suggestions/Tips ¬
• When the total number of pictures
exceeds the following numbers, the
number of remaining pictures does not
appear on the screen.
• PictBridge Print: 1000 or more
• USB Direct-Print: 255 or more
When printing with PictBridge
• When connecting to a printer not
supporting DPOF, DPOF printing
cannot be set. (The DPOF print
selecting screen does not appear.)
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [
• When the [¥] indication lights in yellow
during printing, check if there is a
malfunction on the printer.
86
] is indicated.