Panasonic Lumix DMC-LC50GN Operating Instructions Manual page 35

ª The available flash range to take
pictures
ISO
Available flash range
sensitivity
ISO50 Wide 30 cm – 1.6 m
(DMC-LC70/
Tele
DMC-LC50)
Wide 30 cm – 2.1 m
ISO80
(DMC-LC80)
Tele
Wide 30 cm – 2.4 m
ISO100
Tele
Wide 30 cm – 3.3 m
ISO200
Tele
Wide 30 cm – 4.8 m
ISO400/
AUTO
Tele
• The available flash range is an
approximation.
ª Shutter speed for each flash mode
Flash
Shutter speed
mode
1/60th – 1/2000th
(Except for Slow sync./
Flash ON
Red-eye reduction
[
ISO
AUTO
Flash
ISO
OFF
°1
50 /
( )
°2
80 /
( )
100/
200/
400
°1 :DMC-LC70/DMC-LC50
°2 :DMC-LC80
Recording pictures (basic)
50 cm – 1 m
50 cm – 1.2 m
50 cm – 1.4 m
50 cm – 2 m
50 cm – 2.8 m
])
1 / 8 t h – 1/2000th
(Night portrait
mode:
8 – 1/2000th)
2 – 1/2000th
(Night portrait
mode:
8 – 1/2000th)
¬ Suggestions/Tips ¬
• In Landscape mode [
image mode [
fixed to the Forced OFF [
• When using the flash in [AUTO]
setting, the ISO sensitivity is
automatically adjusted from [ISO50] to
[ISO400] (For DMC-LC80, the ISO
sensitivity can be automatically
adjusted from [ISO80] to [ISO400].).
To avoid noises, decrease the ISO
sensitivity.
• Do not stare at the photo flash from
close proximity when using the
flash.
• If you bring the flash too close to
the subjects, they may be distorted
or discoloured by its heat and
lighting.
• Do not cover the photo flash with
your fingers or any other items.
• If the subject is too close when using
the flash, the picture may be over
exposed.
• When the jitter alert appears, we
recommend using the flash.
• When you set to burst mode or auto
bracket, only 1 picture is recorded for
every flash activated.
• The flash icon turns red when
activating the flash and pressing the
shutter button halfway.
• When the flash is being charged, the
status indicator and the flash icon blink
red, and you cannot take a picture
even when you press the shutter
button fully.
• If the battery indicator is less than
[ ] or setting to the Economy
mode [ ], the LCD monitor turns off
during charging the flash.
• When taking a picture with the flash,
the white balance will be automatically
adjusted [except for [
but the white balance may not be
properly adjusted when the photo
flash is insufficient.
• To avoid picture noises, we
recommend setting [PICT.ADJ.] to
[NATURAL]. (P58)
• Refer to P53 for the ISO sensitivity.
35
]/Motion
], flash setting is
].
] (Daylight)],