Panasonic FZ-Y1 series Operating Instructions Manual page 19

■
Using Recovery Disc
Use the Recovery Disc in the following conditions.
•
You have forgotten the administrator password.
•
Installation is not complete. The recovery partition in the flash memory drive may be broken.
Preparation
●
Prepare the following items:
•
Recovery Disc (è
•
DVD drive
●
Remove all peripherals and SD memory card, etc.
●
Connect the AC adaptor and do not remove it until reinstallation is complete.
1 Connect the DVD drive to the USB port.
2 Start the Setup Utility.
Display "Charm" and touch
Touch [Restart now] under "Advanced startup".
Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
●
If the [Panasonic] boot screen is not displayed, turn on the computer while touching top left
of the screen.
●
If the password is requested, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and touch [Exit] and
double-touch [Load Default Values].
At the confirmation message, touch [Yes].
4 Check the [UEFI Boot] setting of the Setup Utility.
When the recovery disc for Windows 8.1 is used: [Enabled]
5 Set the Recovery Disc into the DVD drive.
6 Touch [Exit] and double-touch [Save Values and Reboot].
At the confirmation message, touch [Yes]. The computer will restart.
7 Press (Rotation lock) button while "Panasonic" boot screen is
displayed.
The Setup Utility starts up.
●
If the password is requested, enter the Supervisor Password.
8 Touch [Exit], then double-touch the DVD drive in [Boot Override].
The computer will restart.
9 Touch [Reinstall Windows.] and touch [Next].
10 At the confirmation message, touch [YES].
11 Touch [Yes, I agree to the provisions above and wish to continue!] and
touch [Next].
Reference Manual "Recovery Disc Creation Utility")
- [Change PC settings] - [Update and recovery] - [Recovery].
19