6. Remove the Security Lock.
Remove the screw.
7. Remove the screws (9).
8. Lift the upper-right side of the cover slightly, and release
the bottom tabs (A). Then, open the cover from the right
side.
●
The left side of the cover is connected to the computer
with the cord. Do not pull the cord.
9. Disconnect the connector (B).
Insulate the connectors on the built-in battery by covering
them with plastic tape, for example.
10. Remove the screws (4) that secures the built-in battery (C),
and remove the built-in battery.
Lift up the Security Lock
cover, and remove it.
Remove the screws (2),
and remove the slot.
A
B
C
15