Linksys LAPAC2600 User Manual page 78

ACL Profile
ACL Name
ACL Type
Rule Configuration
ACL Names
Rule Index
Enable Rule
Action
Match Every Packet
Match Protocol
A name can include from 1 to 32 alphanumeric
characters to identify an ACL.
Configuration type of ACL is IPv4 or IPv6. Click Add
ACL to add one new ACL profile.
Select a profile to configure. An ACL profile includes
ACL name and type. Click Delete ACL to delete an
ACL.
Select and configure a new rule for the selected ACL.
Enable or disable the ACL rule. It's disabled by
default.
Whether the ACL rule permits or denies an action.
Rule matches the frame or packet regardless of its
contents.
If this is checked, you cannot configure any other
matching condition listed below; e.g, Protocol, Source
IP/Port, Destination IP/Port.
Use a Layer 3 or Layer 4 protocol as a matching
condition. Set the protocol value with following
methods.
Select From List

IP – Internet Protocol
ICMP – Internet Control Message Protocol
IGMP – Internet Group Management Protocol
TCP – Transmission Control Protocol
UDP – User Datagram Protocol
Match to Value

Set a protocol with protocol ID from 0 to 255.
78