Linksys LAPAC2600 User Manual page 27

Port Settings
Auto
If enabled, Port Speed and Duplex Mode will become grey
and cannot be configured. If disabled, Port Speed and
Negotiation
Duplex Mode can be configured.
Note—LAG (Link Aggregation) is enabled by default on
Ethernet port 1 and 2. It is highly recommended you keep
auto negotiation enabled on both sides of an aggregate
link. Enable LACP (Link Aggregation Control Protocol) on
this specific LAG interface when you create LAG interface
on switch. If you have to disable auto negotiation, ensure
link speed and duplex (Full) are identical on both sides.
Operational
Current Auto Negotiation mode of the Ethernet port.
Auto
Negotiation
Port Speed
Select the speed of the Ethernet port. Available only when
Auto Negotiation is disabled. The option can be 10M, 100M
or 1000M (default).
Operational
Displays the current port speed of the Ethernet port.
Port Speed
Duplex Mode
Select the duplex mode of the Ethernet port. Available only
when Auto Negotiation is disabled. The option can be Half
or Full (default).
Operational
Displays the current duplex mode of the Ethernet port.
Duplex Mode
Flow Control
Enable or disable flow control of the Ethernet port.
27