Customizing The Telephone - Panasonic KX-HDV430 Operating Instructions Manual

Customizing the Telephone

ECO Mode
Enabling this mode reduces the amount of electricity consumed by the unit.
Note
R When ECO mode is enabled, the "Link Speed" setting (Page 92) changes as follows:
– Link Speed: "10M/Full"
– PC port cannot be used
R When the ECO mode setting is changed, the unit will restart.
R When ECO mode is enabled,
*1 The port of the switching hub to which the unit is connected must be 10 Mbps (Fixed)/full duplex.
Setting ECO Mode
[In standby mode]
1. Tap / . a "System Settings"
2. Tap "System Settings".
3. Tap / . a "ECO Mode"
*1
4. Tap "On". a "OK"
*1 To disable ECO mode, select "Off" (default).
Changing the Telephone's LCD Display
You can change what is displayed on the telephone's LCD while the telephone is in standby mode.
[In standby mode]
1. Tap / . a "Basic Settings"
2. Tap / . a "Display Option"
3. Tap / . a "Standby Display"
4. Select the desired item. a "OK"
Hot Keys
By assigning phone numbers to dial keys, you can make a call by pressing and holding a dial key.
R "Hot Key Dialing", Page 32
Assigning Hot Keys From Phonebook
You can assign a phone number stored in the Personal Phonebook to a key to be used as a Hot Key.
1. In standby mode, press and hold a dial key (0–9) for more than 1 second.
2. Tap .
3. Tap .
4. Enter the desired name.
5. Tap / : Select the desired name.
6. Select a desired phone number.
7. Tap .
*1
is displayed in the status bar.
Customizing the Telephone
65