Receiving Alarms From Network Cameras - Panasonic KX-HDV430 Operating Instructions Manual

3. Tap "Auto Mode".
4. Tap "Auto Tracking".
*1 To cancel Automatic Mode, tap "Off". a "OK"

Receiving Alarms from Network Cameras

When an alarm from a Network Camera (movement detection, error, abnormality, etc.) is detected, this
unit can display the video feed from the camera that issued the alarm.
Note
R Alarms can be indicated by a sound and/or a pop-up message on the display.
R Depending on the Network Camera, this feature may not be available.
When an Alarm Notification Appears in a Pop-up Message
To connect the Network Camera where the alarm occurred
1. Tap "OK" on the pop-up message.
Note
R Tap "Cancel" to not connect to the Network Camera.
R If you received an alarm during a video call, the call is automatically switched to a voice call.
Checking an Alarm
[In standby mode]
1. Tap / . a "Call History"
*1
2. Tap .
3. Tap an item to connect to the camera and view its video feed.
*1 A list of Network Cameras where an alarm has occurred is displayed.
Note
R To delete an item from the list, tap
Tap . a "OK"
Configuring an Alarm Notification
Alarm Notification Settings
[In standby mode]
1. Tap / . a "Basic Settings"
2. Tap / . a "Network Camera"
3. Tap "Alarm Settings".
4. Tap "Notification".
5. Tap "Pop Up". a "OK"
Alarm Disarm Period Settings
You can set the period of time in which other alarm notifications are stopped (disarmed) after an alarm
occurs.
[In standby mode]
1. Tap / . a "Basic Settings"
*1
a "OK"
. a Tap the check boxes of the items you want to delete. a
Network Camera
61