Panasonic KX-HDV430 Operating Instructions Manual page 64

Communication Camera
Note
R Transfer destination's operation screen (KX-HDV430)
– When a voice call is transferred, the voice call screen is shown.
– When a video call is transferred and the Communication Camera is registered at the transfer
destination, the video monitor screen is shown.
screen is shown.
*1 To make a voice call while monitoring a video feed, tap the screen, and then tap
Operation Icons of the Communication Camera Screen
Normally, the video feed is displayed in full screen. If you tap the screen, the status bar and operation
area are displayed. After a certain amount of time, the display returns to full screen. (Tap the screen
again to show the status bar and operation area.)
[While displaying the video feed from a Communication Camera (operation screen)]
Tap the screen to display the icons before performing the following operations.
Pan: Tap / .
Tilt: Tap / .
Zoom in: Tap .
Zoom out: Tap .
*1
Unlock : Tap .
Switch from monitoring the video feed to a call: Tap
Disconnect: Tap .
*1 Controlling devices connected to a Communication Camera (for example, unlocking a door).
64
*1
If the camera is not registered, the video call
.
or go off-hook.