Panasonic KX-HDV430 Operating Instructions Manual page 58

Network Camera
To stop switching
[While switching]
1. Press /[MENU].
2. Tap "Camera Selection".
3. Tap any camera name.
Note
R The order in which video feeds are displayed follows the order in which the Network Cameras are
registered.
Interval switching settings
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Camera Selection".
3. Press /[MENU].
4. Tap "Sequential Interval".
5. Tap / : Select the desired item. a "OK"
Using Phone Numbers Associated with a Network Camera
Paging Number
Paging can be performed using a phone number (Paging Number) associated with a Network Camera.
[While displaying a video feed from a Network Camera (operation screen)]
1. Tap the screen.
2. Tap .
Note
R A call is a voice call using the speakerphone from the default line.
Linked Number
The video feed of the Network Camera can be viewed by making or receiving a call using a phone
number (Linked Number) associated with the Network Camera.
[In standby mode]
1. Dial the Linked Number.
2. Tap "Voice Call".
The video feed of the Network Camera associated with the Linked Number is displayed.
[While receiving a call]
1. Tap "Voice Call".
If the call received was made using a Linked Number, the video feed of the associated Network
Camera is displayed.
Network Camera Presets
You can select a viewing position that has been registered in the Network Camera's settings beforehand.
These registered viewing positions are called "presets".
Note
R Depending on the Network Camera, this feature may not be available.
[While displaying a video feed from a Network Camera (operation screen)]
1. Press /[MENU].
2. Tap "Preset".
58