Communication Camera - Panasonic KX-HDV430 Operating Instructions Manual

Communication Camera

By registering a Communication Camera and then selecting it from the list, you can make a call to
monitor the camera's video feed and allow voice communication.
When a call is received from a Communication Camera, you can monitor video feed of the other party.
You can operate the Communication Camera (pan/tilt), zoom in/zoom out the video feed, and control
devices connected to the Communication Camera (for example, to unlock a door). These features can be
used with KX-NTV150 and KX-NTV160 models.
This chapter describes the special functions and operations of the Communication Camera.
Refer to the relevant sections of this manual for operations not described here.
Using a Communication Camera
Registering a Communication Camera
You can register up to 16 Communication Cameras connected to the network.
[In standby mode]
1. Tap / . a "Basic Settings"
2. Tap / . a "Comm. Camera"
3. Tap / : Select the number you want to register.
4. Enter the necessary information.
R Name
Specify the camera's name. You can enter up to 24 characters.
R Phone Number
Enter the phone number of the Communication Camera.
R Ringer Type
Set the ringtone for when a call is received by the Communication Camera.
The default is "Ringtone 10".
Calling a Communication Camera
[In standby mode]
1. Tap / . a "Comm. Camera"
2. Tap / : Select the Communication Camera to call.
3. Tap "Camera Monitor" to monitor the video.
Tap "Camera Call" or go off-hook to make a voice call.
Note
R To make a voice call while monitoring a video feed, tap the screen, and then tap
R When a call is made by dialing a phone number, the video call screen is displayed.
Receiving a Call from a Communication Camera
R When a call is received, only one ring will be heard from the speaker.
R When a call is received, the camera's video feed is displayed. Then, to enable voice communication,
tap the screen, and then tap
R While on a voice call with a Communication Camera and a call is received from another
Communication Camera, tap "Camera" to answer the call. The current call will be put on hold.
Transferring a Call with a Communication Camera
For details about this operation, see "Transferring a Call (Call Transfer)", Page 39.
.
Communication Camera
or go off-hook.
63