Panasonic BL-C10 Operating Instructions Manual page 69

Panasonic instruction web camera bl-c10
Table of Contents

Advertisement

11.
Click [Go to Image Buffer/Transfer page].
The Image Buffer/Transfer page is displayed.
Notes
If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we
recommend you to set a long interval. In an emergency situation, the E-
mail transfer can be stopped by enabling privacy mode using a mobile
phone (see page 26).
Sensor transfer stops its operations until the camera finishes all transfers.
For example, if the camera transfers 3 images per minute and 6 images in
total with setting 1 minute of sensor deactivation time, the sensor will be
in the following operation.
Detectable
A heat change occurs.
Buffered images will be deleted by doing the following.
Turning off the camera.
Saving the settings of Image Buffer/Transfer or Date and Time.
Executing [Restart], [Update Firmware] or [Reset to Factory Default].
Clicking [Delete Buffered Images] on the Image Buffer/Transfer page
(see page 60).
120 seconds
1st 2nd 3rd 4th
Undetectable
1 minute
Sensor
5th 6th
deactivation
time
Undetectable
Operating Instructions
Detectable
69

Advertisement

Table of Contents
loading

Table of Contents