Panasonic BL-C10 Operating Instructions Manual page 28

Operating Instructions
Basic
(1) Network
(2) UPnP
(3) Viewnetcam.
com
(4) Date and Time Sets the date and time, automatic time adjustment and
(5) Camera
Account
(6) Administrator
(7) General User
Advanced
(8) Image Display
(9) Multi-Camera
(10) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page
(11) Operation
Time
(12) Indicator
Control
(13) Privacy Mode
If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
*1
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
28
Configures the network settings such as connection mode
to connect the camera to the network (see page 29).
Enables automatic port forwarding or shortcut to the
camera (see page 33).
Registers with the Viewnetcam.com service (see page 34).
adjust clock for daylight saving time settings (see page 36).
Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page 38).
Sets authentication setting and administrator security (user
*1
name and password) (see page 42).
Sets general user security (user name and password) and
*1
general user's feature restriction (see page 46).
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, limit continuous motion
JPEG , and language (see page 48).
*1
Sets the camera IP address or host name, camera name on
*1
the Multi-Camera page (maximum 12 cameras) (see page
51).
53 or page 60).
Sets time period to display camera images (see page 70).
Sets indicator display (see page 72).
Enables privacy mode (see page 73).