Panasonic BL-C10 Operating Instructions Manual page 39

Setting
Camera Name
White Balance
AC Power
Source
Frequency
Pan Range
*1
• The camera name is displayed on the Single Camera
page.
• Enter ASCII characters (see page 102) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
["], ['], [&], [<], and [>] are not available.
Select from the following options.
• Auto (default)
• Fixed Indoor
• Fixed Fluorescent
(White)
• Fixed Fluorescent
(Daylight)
• Fixed Outdoor
• Hold
Note
White balance is also saved in the home position, sensor
position and preset buttons.
• In some cases, the image may have noise due to
fluorescent light. Select the frequency that is used in your
area.
• 50 Hz (default)
• 60 Hz
Select from the following options.
• Minimum
• Home Position
• Maximum
• The values must be selected as minimum home
position maximum.
Description
— Automatic adjustment
— Electric bulb (2800 K)
— White (3600 K)
— Daylight (4000 K)
— Solar light (6000 K)
— Setting [Hold] keeps the current
white balance.
— Current settings, -50—+50
— Current settings, -50—+50
*2
— Current settings, -50—+50
Operating Instructions
39