Table of Contents
Advertisement
Maintenance
In order to maintain the product's safety and performance, clean the product periodically as instructed
below.
Pull out the power cable plug, and wipe the unit clean with a dry cloth.
If it is extremely dirty, dip a cloth into a diluted solution of kitchen detergent (neutral), squeeze it hard, and wipe the product
surfaces carefully.
To clean the lens, use a lens cleaning paper (one which is used to clean eyeglasses and cameras).
Notes
Do not use benzine, paint thinner, or other volatile liquids.
When using a chemical duster, carefully read the caution notes on its use.
Replacing the consumable parts
The belt is consumable.
It needs to be replaced at periodic intervals.
For details on the belt replacement, consult your dealer.
Replacing the belt
As a general rule of thumb, the belt needs to be replaced after about 4 years.
(When it is used 8 hours a day with repeated panning and tilting for 10 seconds and stopping for 50 seconds)
Replace the belt when the preset stop accuracy has deteriorated.
58
Hide quick links:
Advertisement
Table of Contents
