Getting started with the HomeHawk!
R OK Google, start <mode name>.
R OK Google, activate <mode name>.
Stopping modes command example:
R OK Google, stop <mode name>.
R OK Google, activate Basic Mode. (front door cameras and outdoor cameras only)
R OK Google, activate Basic. (shelf cameras, floor cameras, and window cameras only)
R OK Google, deactivate <mode name>.
Enabling/disabling the privacy mode (shelf cameras and floor cameras only)
The privacy mode of cameras can be enabled and disabled.
Enabling privacy mode voice command example:
R OK Google, turn on privacy mode of <camera name>.
Disabling privacy mode voice command example:
R OK Google, turn off privacy mode of <camera name>.
Checking the temperature of cameras (shelf cameras and floor cameras only)
You can check the temperature of the area surrounding the camera.
Checking the temperature voice command example:
R OK Google, what's the temperature of <camera name>.
Adjusting the lighting of cameras (floor cameras only)
You can adjust the lighting of the camera.
Adjusting the lighting voice command example:
R OK Google, turn on <camera name + light>.
R OK Google, set <camera name + light> to xx %.
R OK Google, brighten <camera name + light>.
R OK Google, dim <camera name + light>.
R OK Google, turn off <camera name + light>.
System settings and maintenance
Country/region settings
You can select the country and region where you use your devices.
1
From the [HomeHawk] app home screen, tap
2
Tap [Mobile Device Settings] ® [Country / Region].
3
Select the desired country/region and then tap [OK].
Event logs
You can view and delete event logs that contain information about sensor detections, device errors, etc.
40
® [Settings].