Panasonic AW- PH350 Operating Instructions Manual page 27

Examples of connections
5. When controlling the camera and pan-tilt head using a personal computer, etc.
and transmitting composite signals
Printed circuit board
switches:
Analog settings
CONTROL IN IP/RP
Y/VIDEO OUT
Cable with a nominal cross
section of 1.25 mm
max. 98.4 feet (30 meters)
O I
AC adapter:
AW-PS300
RS-232C/RS-422 converter
RS-422
1 TXD+
2 TXD–
VCC
1 k
3 RXD+
AD7306JR
390
4 RXD–
1 k
5 GND
OUse the camera/pan-tilt head connecting cable (AW-CA50T29) to connect the pan-tilt
head with the convertible camera.
OSet the printed circuit board switches to the analog settings.
OUse a coaxial cable (BELDEN 8281) to connect the Y/VIDEO OUT connector on the
pan-tilt head with the VIDEO input connector on the color monitor.
OConnect the CONTROL IN IP/RP connector on the pan-tilt head to the RS-232C
connector on the personal computer (Windows) via an RS-232C/RS-422 converter.
(Consult your dealer)
OCheck that the pan-tilt head and camera can be controlled using the personal
computer.
Pan-tilt head cable:
AW-CA50T29
10BaseT straight cable:
UTP category 5, max. 3,280 feet
(1,000 meters)
RS-232C/RS-422 converter:
Consult your dealer.
RS-422
or more
2
Coaxial cable:
BELDEN 8281
(Cable compensation is
necessary if this cable it going
to be run over a long distance.)
RS-232C
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
RS-232C
RS-232C crossover cable
max. 49.2 feet (15 meters)
27
Personal computer
(Windows)
Color monitor
VIDEO IN