CONGRATULATIONS!
When you purchased your new fi replace, you joined the ranks of thousands of individuals
whose answer to their home heating needs refl ects their concern for aesthetics, effi ciency
and our environment. We extend our continued support to help you achieve the maximum
benefi t and enjoyment available from your new fi replace.
Thank you for selecting a IHP fi replace as the answer to your home supplemental heat-
ing needs.
TABLE OF CONTENTS
Fuel .................................................... Page 4
Creosote ............................................. Page 7
Ashes ................................................. Page 9
Gravity Kit .......................................... Page 15
Warranty ............................................ Page 29
SAFETY RULES FOR OPERATING
YOUR FIREPLACE
•
Use only IHP glass doors, specifi cally de-
signed for the WRT4826WH fi replace.
•
When cleaning the fi replace, the Ashes should
be placed in a steel container with a tight
fi tting lid and moved outdoors immediately.
Other waste shall not be placed in this con-
tainer. The closed container of ashes should
be placed on a non-combustible fl oor or on
the ground, well away from all combustible
materials, pending fi nal disposal. If the ashes
are disposed of by burial in soil or otherwise
locally dispersed, they should be retained in
the closed container until all cinders have
thoroughly cooled.
CAUTION: KEEP COMBUSTIBLE MA-
TERIALS AT LEAST 48 INCHES AWAY
FROM THE FRONT OF THE FIREPLACE
OPENING.
CAUTION: BURN UNTREATED WOOD
ONLY. OTHER MATERIALS SUCH AS
WOOD PRESERVATIVES, METAL FOILS,
COAL, PLASTIC, GARBAGE, SULPHUR OR
OIL MAY DAMAGE THE CATALYST.
CAUTION: DO NOT OPERATE WITH-
OUT THE CATALYTIC COMBUSTOR IN
PLACE.
CAUTION: NEVER BURN WITH THE BY-
PASS OPENED EXCEPT FOR FIRE START-
UP AND WHEN RELOADING THE STOVE.
THE FIREPLACE
INTRODUCTION
The WRT4826WH fi replace is an energy effi cient,
heat circulating, close combustion fi replace us-
ing the catalytic technology. You will receive a
lifetime of comfort and enjoyment from your
fi replace provided it is maintained and oper-
ated properly.
•
Please read these instructions and retain this
manual for future reference.
•
Before beginning the fi replace installation,
consult the local authorities to obtain your
building permit and check your local building
codes. Install the fi replace only as described
in these instructions and using only IHP
components.
•
This fi replace has been tested for CAN/ULC
S610-M87 and ANSI/UL 127 under report
number 192-5237. It has also been tested
for EPA 40 C.F.R Part 60, section 60.532(b).
Certifi cate number 518.
•
The WRT4826WH Fireplace is not intended
for use with a gas log set. Failure to follow
these instructions will void the certifi cation
and the warranty of the fi replace and may
result in an unsafe installation.
Parts Required
•
Fireplace model WRT4826WH
•
Door set (Black, Gold, Nickel)
•
Louver set (Del Sol, Diamante, Luna, Fiori,
Strada)
•
7" diameter chimney
model Secure Temp
*
ASHT+, Secure Temp S-2100+ or ACBI
manufactured by Security Chimneys Inter-
national™ only, including:
- Chimney lengths
- Elbows (where necessary)
- Radiation shield, Attic radiation shield
- Roof fl ashing
- Rain cap
- Support
•
7" diameter chimney
**
Model DuraTech
DTC manufactured by DuraVent
including:
- Chimney lengths
- Elbows (where necessary)
- Radiation shield, Attic radiation shield
- Roof fl ashing
- Rain cap
- Support
•
Outside air kit (included)
Additional Equipment (optional)
•
Forced Air Kit
•
Gravity venting system
•
Panel for clean face option
(only with gravity venting system)
•
Fireplace fan kit, UZY5
•
Rigid Firescreen
•
ACBI Chimney Outside Air Kit (required
with ACBI chimney installation)
Not tested under EPA certification. If
installed, this appliance no longer quali-
fi es for EPA certifi cation. Check with local
authorities having jurisdiction for require-
ments in your area.
*
Available from Security Chimneys™
**
Available from DuraVent
®
®
®
only,
3
®