Getting Started - Panasonic TX-76DT30A Operating Instructions Manual

Getting Started

Connecting the Aerial
For your safety any external aerial should be installed by a reputable qualified installer and should comply
with Australian Standard AS1417.1. The RF (Aerial) Input impedance of this television is 75 . If your
aerial lead is 300 ribbon (two wires separated by a flat plastic sheet) you will require a 300 /75
in order to connect your aerial to the television.
If you are just using the television with no other equipment (VCR, DVD Player, Set Top Box etc) then
connect the aerial as per step 1. If you are connecting VCR then connect the aerial as shown in step 2. If
your VCR is Q-Link compatible then go to step 3.
Step 1 - Using the television on its own.
Step 2 - Using the television with a Standard VCR.
Step 3 - Using the television with a Q-Link compatible VCR.
Refer to pages 38 to 41 for S-VHS VCR, DVD and other Audio / Video connections.
RF-IN Terminal
CI 1 CI 2
TO ACCESS COMMON
INTERFACE SLOTS PLEASE
REMOVE COVER
VCR
RF OUT
RF IN
C I 1 CI 2
TO ACCESS COMMON
INTERFACE SLOTS PLEASE
REMOVE COVER
VCR
RF CABLE
RF IN RF OUT
(Not Supplied)
75? C o-Axial
Cable
AUDIO OUT
AV1 AV2
RF CABLE
(Not Supplied)
Use AV2
Socket
AUDIO OUT
AV1 A V 2 AV4
Scart - Scart
Cable
(Not Supplied)
Balun
AV4
5