Rear Panel Connections - Panasonic TX-76DT30A Operating Instructions Manual

Rear Panel Connections

Connecting a Standard VCR to the Television
Most standard Videocassette Recorders use RCA type video and audio connectors. If your VCR has
different type connectors please refer to the VCR instruction book for details. Use the supplied Scart
adaptor and RCA cables (not supplied).
AUDIO OUT
AV1 AV2 AV4
CI 1 CI 2
TO ACCESS COMMON
INTERFACE SLOTS PLEASE
REMOVE COVER
RF OUT
RF IN
NOTE: A mono VCR can be connected to this television.
Connect the VCR Audio out to the Left Audio input on the television. The sound will automatically be
directed to both speakers.
Make sure that the Scart adaptor is switched to IN.
Connecting an S-Video VCR to the Television
S-Video equipment uses a 4Pin Mini Din (Male) plug for the video and RCA plugs for the audio. When an
S-Video cable is connected to an S-Video input terminal, the RCA video terminal for that AV position will
be disconnected.
AUDIO OUT
A V 1 AV2 AV4
CI 1 CI 2
TO ACCESS COMMON
INTERFACE SLOTS PLEASE
REMOVE COVER
RF OUT
RF IN
Use the supplied Scart adaptor, RCA cables (not supplied) and the S-Video cable (not supplied).
Make sure that the Scart adaptor is switched to IN.
40