Conformity - Siemens G120P Technical Manual

Technical data
9

Conformity

9.2 Conformity
94 | 98
Siemens
Building Technologies
Mechanical data
Vibratory load
● Transport (in transport packaging) according
to EN 60721-3-2
● Operation
Test values according to EN 60068-2-6
Shock stressing
● Transport (in transport packaging) according
to EN 60721-3-2
All devices and components
● Operation
Test values according to EN 60068-2-6
Frame sizes A to F
Environmental conditions
Protection class according to EN 61800-5-1
Touch protection according to EN 61800-5-1
Permissible ambient and coolant temperature (air)
during operation for line-side power components
and Power Modules
● Low overload
(low overload LO)
● High overload
(high overload HO)
Permissible ambient and coolant temperature (air)
during operation for Control Units and
supplementary system components
Class 2M3
Class 3M2
Class 2M3
Class 3M2
Class I (with protective conductor system) and
Class III (PELV)
If used as intended
See derating factors for derating
0 to 40 °C (32 to 104 °F) without derating
> 40 to 60 °C (104 to 160 °F) with derating
0 to 50 °C (32 to 122 °F) without derating
> 50 to 60 °C (122 to 160 °F) with derating
● With CU230P-2: 0 to 60 °C (32 to 140 °F)
● With IOP-2: 0 to 50 °C (32 to 122 °F)
● With BOP-2: 0 to 50 °C (32 to 122 °F)
● With blanking cover: 0 to 60 °C (32 to 140 °F)
● Up to 2000 m above sea level
A5E36496664A_d
2016-03-17