Siemens G120P Technical Manual page 35

5.3.2.3 Connecting line and motor terminals
Siemens
Building Technologies
Instructions on how to connect up line and motor terminals are given below:
● For IP20 devices, follow the instructions in Chapter IP20 devices [➙ 35]
devices.
● For IP55 devices, follow the instructions in Chapter IP55 devices [➙ 37]
devices.
In addition to the information below, please also read Chapter EMC-compliant
installation (examples) [➙ 44].
IP20 devices
Overview
Figure 12: Connection of G120P IP20
Item Designation
1
Line filter (filter B only)
2
Power Module
3
Sine-wave filter or dv/dt filter (optional)
NOTICE
Scope of supply for IP20
A screening termination kit for the Power Module PM230 is included with the IP20
devices in frame sizes A to C. For frame sizes D to F, the screening termination
kit must be ordered separately if required.
Installing the Power Module
1 2
Installing
5
3
35 | 98
A5E36496664A_d
2016-03-17