Panasonic ES-RT87 Operating Instructions Manual page 13

• The appliance can be charged even with the cleaning
liquid unit removed.
6
6
Disconnect the adaptor after charging is completed.
While charging
The charge status lamp (
glows.
Abnormal charging
The charge status lamp (
• After charging is completed, turning the power switch ON
with the shaver plugged in or connected to the self‑cleaning
recharger will cause the charge status lamp (
and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
After charging is completed
) The charge status lamp (
turns off.
) blinks twice every second.
) to turn on,
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
Charging without the self-cleaning recharger
You can also charge without the self‑cleaning recharger.
1
1
Insert the appliance plug [CN]
into the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor [CK] into a
)
household outlet.
• Wipe off any water droplets on the
appliance socket.
3
3
Disconnect the adaptor after charging is completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
) may not glow for a few
2
1
13