Connecting The 650W Ac Power Supply; Connecting The 650W Dc Power Supply - HP HPE FlexFabric 5930 Installation Manual

Connecting the 650W AC power supply

Insert the female connector of the AC power cord supplied with the power supply into the power
1.
receptacle on the power supply.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
2.
33.
Connect the other end of the power cord to an AC power outlet.
3.
Figure 33 Connecting the 650W AC power supply
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply

Connecting the 650W DC power supply

CAUTION:
The power cord color code scheme in
country or region might use a different color scheme. When you connect the power cord, always
identify the polarity symbol on its wires.
To connect the 650W DC power supply:
Unpack the DC power cord, identify the plug for connecting to the power supply, orient the plug
1.
with the power receptacle on the power supply, and insert the plug into the receptacle
(see Figure
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
2.
33.
Connect the other ends of the wires to the DC power source wiring terminals, with the negative
3.
wire (– or L–) to the negative terminal (–) and the positive wire (+ or M/N) to the positive terminal
(+).
34).
Figure 34 is for illustration only. The cable delivered for your
27
Figure
Figure