Connecting The Power Cord; Connecting The 650W Ac Power Supply; Connecting The 650W Dc Power Supply - HP 5920 Switch Series Installation Manual

Connecting the power cord

Connecting the 650W AC power supply

1. Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2. Use a cable tie to secure the power cord to the handle of the power supply, as shown in
3. Connect the other end of the power cord to an AC power outlet.
Figure 23 Connecting the 650W AC power supply
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply

Connecting the 650W DC power supply

1. Unpack the DC power cord, identify the plug for connecting to the power supply, orient the plug
with the power receptacle on the power supply, and insert the plug into the receptacle. See
24.
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
2.
3. Connect the other end of the power cord to the DC power source.
Figure 24 Connecting the 650W DC power supply
20
Figure 23.
Figure
Figure 23.