Table of Contents
Advertisement
Installation
Provide the following items to install the pan-tilt head and underneath support
plate.
Embedded anchors (M6 size): C4 (for the pan-tilt head)
p For the installation positions and dimensions of the anchors, refer to the drawing on
page 11.
Hexagon head bolts or nuts (M6: 4 pcs each, M8: 1 pc each)
Thickness of pan-tilt head area
Thickness of underneath support plate 1.6 mm (1/16˝) : C1
p When using bolts to install the pan-tilt head and underneath support plate, decide on
their respective lengths after factoring in the dimensions given above.
Flat washers, spring washers (M6: 8 pcs each, M8: 2 pcs each)
Hangers
(Be sure to ask your dealer to install the unit.)
(M8 size): C1 (for the underneath support plate)
10 mm (13/32˝) : C4
– 21 –
Installation work
Advertisement
Table of Contents
